Ads by Google
Dynamo solar bike light
Functions:LED:3pcs super bright white LEDFunctions: LED-3LED-flash-offCranking for power, low noise but high efficiencyAsorbe solar energy for power, green and environment protection Controlled by electric switch, long life-spanNew fangled design which can charge the light by cranking, energy saving and no pollution. Need no batteries
This product adopts 3-phase brushless generator for power generation to charge its inside 40mAh/3.6V chargeable lithium battery. The power stored is transformed to the LEDs for lighting. With a Torch Switch to control the model: 1LED→3LED→flashing→Off. Features:1,Cranking for power, low noise but high efficiency.2,Absorb solar energy for power, green and environment protection.3,Ultra bright lighting.4,Controlled by electric switch, long life-span.5,Newfangled design which can charge the light by cranking, energy saving and no pollution. Need no batteries.6,Newfangled design which can be used in the bicycle 1) Main Technical Parameters:The Max. Luminous flux | ≥12 Lm |
The Max. beam luminous intensity | ≥ 50000mcd |
Lighting time after 1 minute cranking | ≥15 Minutes |
Lighting time after 30mins charging by light energy | ≥10 Minutes |
Lighting time after full charged | ≥2.5hours |
Lighting distance(Center point luminous intensity 0.2lux) | ≥10m |
Charging/discharging circle | ≥500 times |
The Max.power output of the brushless generator | ≥2.5w |
LED lifetime | ≥100000 Hours |
Main body material | ABS |
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
Product size | 86x44.3x36mm |
Product weight | 80.2g |
Specification of built-in battery | Chargeable lithium battery Lir2032 :3.6V 40mAh |
Solar Panel: | 5.4v,5mAh amorphous silicon cell panel |
Dynamo solar bike light