ro pure water filter Mitsubishi touch screen PLC control system Stainless steel material 2 stage RO system

2 stages reverse osmosis high pure water for tube/micro circuit/pharmaceutical/electronic componets industrial

Water capacity: 2500L/H

Rated voltage: AC 380V

Pre-treatment equipment: Quartz sand filter, Active carbon filter, Water softener,

PP sediment membranes filter

Two stages reverse osmosis system

Working temperature: 5-40°C

LCD touch screen

Features

Two-stage RO water treatment, pure water reaches HDF water requirements

Programmable PLC controller

Bacteria& endotoxin removable rate: 99.8%

Ion removal rate: 99.5%

Recovery rate: 65-85%

Warning alarms when anomalous water level/pressure

Protect from low/high pressure, short/open circuit, leakage and over current

Timing RO membrane auto wash

Parameters

Produced waterTDS≤200ppm

Sea water temperature 5°C~45°CRate of desalination≥99.2%

Power by client demand(Voltage and frequency 380V/50HZ 220V/440/415 60HZ)

Operating pressure (4.0~6.5MPa)

Output Capacity(M³/H)1-10

Electro-consumption/ton(Kwh/T) 1.5

Dimensions L*W*H(mm)  6600*1200*2000

Application Range:

Boiler Feed Water.

food & beverage, brewing fresh water supply.

Electronic, chemical, pharmaceuticals high purity water supply.

High salinity water desalination.

Technique Parameter:

TDS≤10000mg/L

Application Scope

TDS≤10000mg/L

Output Water Quality TDS≤200mg/L. Meet the World Health Organization (WHO) Guidelines for Drinking Water Quality

Also can be individually designed according to customer demand.

Recovery Rate: 65%~75%

Adapted Seawater temperature: 5.0~35.0°C.

Freshwater Electricity Consumption/Ton: below 1.5kW·h/m3 .

2 stages reverse osmosis high pure water for tube/micro circuit/pharmaceutical/electronic componets industrial