Features

1)Outtrigger tilt functions, the platform can be achieved during the ups and downs do not touch on the ground to reduce the equipment was damaged in the landing ground.

2)Tilt lift platform can ramps load car easily.

3)The height of the platform is reasonable ,make operation and maintenance converninece.Humanistic designs will make the clamp adjust upper and lower,front and back at very least bit.

4)The pulling tower rotate at 360 degree around the platform,making the right platform working continuously.

5)Equipped with lots of pulling tools,the operator can choose any of them by themselves.

6)Two pulling tower can working at the same time, it ‘s proved the superiority of the partial pulling repair.

Technical Parameter:

1)Table Length                    5200mm

2)Table Width                     2100mm

3)Table Height                    580mm

4)Hydraulic Pressure               70Mpa

5)Post Max.Tension                95KN

6)Post Working Range              360°

7)Pneumatic Pressure              0.8MPa

8)Max.Lifting Weigh              3000kg

9)Total Weight                   2100kg/2150kg

Auto Body Repair System DSL-T2000