Features:

1)Outtrigger tilt functions, the platform can be achieved during the ups and downs do not touch on the ground to reduce the equipment was damaged in the landing ground.

2)Tilt lift platform can ramps load car easily.

3)The height of the platform is reasonable ,make operation and maintenance converninece.Humanistic designs will make the clamp adjust upper and lower,front and back at very least bit.

4)The pulling tower rotate at 360 degree around the platform,making the right platform working continuously.

5)Equipped with lots of pulling tools,the operator can choose any of them by themselves.

6)Two pulling tower can working at the same time, it ‘s proved the superiority of the partial pulling repair.

Technical Parameter:

1)Table Length                      5200mm

2)Table Width                      2000mm

3)Table Height                     580mm

4)Hydraulic Pressure                70Mpa

5)Post Max.Tension                  95KN

6)Post Working Range                360°

7)Pneumatic Pressure                 0.8Mpa

8)Max.Lifting Weight                3500kg

9)Total Weight                      2100kgs

Auto Body Repair System DSL-1000