1. Car Collision repair bench made by steel plate Q345 2. Length:5200mm, Width:2000mm, Height:570mm 3. Lifting Weight: 3000kg

                                   Car Collision Repair Bench FA10

1. The platform panel is formed by the large-scale CNC cutting machine from a single cut. The notch is smooth with no heat deformation.

2. All parts are treated with shot blasting to eliminate welding stress and increase surface strength, which improves the painting adhesion.

3. The platform is spliced with national standard and high quality steel plate through carbon dioxide welding with high strength, good rigidity, and more process holes for anchoring parts mounting.

4. The towers are 360 °movable,freely and flexibly,the cylinder works vertically without any components forces consumption,powerful and accurate tensile force.

5. Hydraulic system with good design is powerful and gives it a long useful life and low failture rate.

6. High precision measuring system, newest boy data video and instruction manual are attached, easily accessible during maintenance.

7. High quality chain (T8) and forged sheet metal tools (45#) are easy and convenient to operate with long service life.

8. Strength needed parts like tower guiding ring, main clamp support and tower rear coverplate adopt inblock cast to ensure high strength and deformation resistance.

9. The principal clamp can fix position and clamp the cars rapidly,accurately,and firmly.and many clamp such as benz, bmw, Volvo, and Honda you can select.

10. Appropriate for operating maintenance of medium or small and cars.

Technical Parameters:

No.	Parameters	Unit	Value
1	Working Platform Length	mm	5200
2	Working Platform Width	mm	2000
3	Working Platform Height	mm	570
4	The max working pressure of hydraulic system	MPa	70
5	The max lifting force of tower cylinder	KN	95
6	The pulling range of the tower	°	360
7	The pressure of air source	MPa	0.8
8	Max lifting weight	kg	3000
9	Equipments gross weight	kg	2400

Car Collision Repair Bench