Auto Body Repair System 1.Height of frame machine:580mm 2.Length of frame machine:5600mm 3.Width of frame machine:2000mm.

Auto Body Repair System

Product Specification

Length	5200mm
Width	2000mm
Height	580mm
Radius of Pulling	360°
Hydraulic Power	70Mpa
Power Pulling Capacity	95KN

Function

1.Outrigger tilt functions, the platform can be achieved during the ups and downs do not touch on the ground to reduce the equipment was damaged in the landing ground.

2.Tilt lift platform and ramps loads car easily.

3.The height of the platform is reasonable,make operation and maintenance convenience.Humanistic designs will make the clamp adjust upper and lower,front and back at very least bit.

4.The pulling tower rotate at 360°around the platform,make the ring platform working continuously.

5.Equipped with lots of pulling tools,the operator can choose any of them by themselves.

6.Two pulling tower can working at the same time,it’s proved the superiority of the partial pulling repair.

Auto Body Repair System