Multifunctional shortwave infrared paint curing lamp HR6600W with distance and temperature sensors (infrared paint drying heater

Multifunctional shortwave infrared paint curing lamp HR6600W

1.Brife:

Generally speaking the higher the temperature, the shorter the wavelength produced. The difference between the three types -- long, medium, short, is in the depth of penetration through the paint film (in automotive applications) and excitement of the molecular structure. The advantage of using infrared is that only heats objects that are placed in its path, directly focusing energy where it's needed. Infrared equipment causes molecular excitement both in the paint and in the substrate which in turn causes heat to pass back through the coating via conduction. The use of shortwave infrared is in fact triggering a two way curing using radiated energy from the surface and conduction from the substrate and it is this effect that produces such good through curing. Shortwave produces high temperature that dramatically accelerate the curing/drying process, unlike traditional method, the cured paint could not be skinned, trapping solvent that will produce solvent pop (a pinhole effect) to the finish. Another benefit is that infrared is much more efficient than convection, and it is this combination of fast, high quality curing with low running costs.

2. Features:

Aluminum upright column reduces the weight of whole machinePhilips or Vpower 21 inch short-wave infrared quartz halogen lampAutomatic devices, with electronic timerThe angle of lamp panel can be adjusted in the lengthwise and lateral directionsInput voltage: 1ph230V 5/10A 50/60HzPower:2200W(2 lamps) 3300W(3 lamps) 6600W(6 lamps)Temperature range:40°C-75°CAdjustable time settingsThe low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panelSuper-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

Multifunctional shortwave infrared paint curing lamp HR6600W