Welcome to ECVERY
SAE J1401 hydraulic brake hose
SAE J1401 hydraulic brake hose
Supplier Info
[China Supplier]
Contact Person : Ms. Liu Aris
Tel : 0086-532-88965775
Fax : 086-532--88965775
Product Detail
*Low volumetric expansion *Ozone an UV resistance *High corrosion resistance Technical Parameters of Hydraulic Brake Hoses 

Usage

Inner diameter

Outer diameter & tolerance

Explosion pressure Mpa

Expantion ml/m

Flex Fatigue

Low Temperature resistance

Pulse Resistance 0-22Mpa

Ozone durability 50 ± 5pphm 50

6.9 Mpa

10.3 Mpa

Exported Auto

3.0-0.5

 

11-0.3

55

 

≤ 1.15

≥ 35

-60

1.5x10

70 ± 2h

Domestic auto

3.2 ± 0.1

10.5 ± 0.2

50

≤ 1.08

≤ 1.38

≥ 35

-40

 

70 ± 2h

Motorcycle

3.2 ± 0.1

10.5-0.2

50

≤ 0.54

≤ 0.69

≥ 35

-40

 

70 ±

Main sizes:

3.2mm*10.5mm,length is 50m/roll

4.8mm*12.5mm, length is 50m/roll

*Compatible with FMVSS 116 DOT 3, DOT 4 and most non-petroleum based brake fluids

*Proprietary structure design with three layer rubber and two PVA braided reinforcement

Uses: Act as apressure transmission for auto hyraulic pressure brake system.Features: The brake hose assembly are braided with hign strength,manifold,polyester threads,and have such very good performance as the following,good flexibility bursting resistance,high tensile strength,low swell increment of the internal volume,ozone resistance.low-temperatance,benging resistance,and good compatibility,with stable,safe andreliable braking effects.

Temp range: -40°C ~ +100°C

Reinforcement: The hose consists of an inner tube of oil synthetic rubber, wire braid reinforcement,and an oil and weather resistant synthetic rubber cover.

SAE J1401 hydraulic brake hose

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.