Welcome to ECVERY
Hot Sale At home and abroad AAC Cutting Machine Made by SLTD
Hot Sale At home and abroad AAC Cutting Machine Made by SLTD
Supplier Info
[China Supplier]
Contact Person : Ms. Yan Jessure
Tel : 86-371-86120366
Fax : 86-371-64318386
Product Detail
AAC Cutting Machine 1.advanced technology 2.six-side cutting in one step 3.stable performance and high efficiency

AAC Cutting machine


Introduction of AAC Cutting Machine:


AAC cutting machine is one of the key equipments in the production line of autoclaved aerated concrete block with annual capacity of 50,000 m3 to 200,000 m3. It’s absolutely necessary in promoting the production capacity and quality.

Cutting machine series manufactured by our factory, can accomplish six-side cutting at one step without the second lifting so that the damage to the body produced during several time's lifting can be reduced.

Through having gone on technical reforming, our AAC cutting machine has stable performance and high efficiency.



Working principle of AAC cutting Machine:


a. The aerated concrete body and the bottom plate are put on the overturn table;

b. Moved to the slip table of cutting machine

c. Then they are turned by 90 degree, and the body is moved to the destination.

d. The body is cut in four sides horizontally, and then cut in two sides vertically.

e. The cut body moves from the small slip table to overturn table, and is turned by 90 degree so that it is put on the overturn table. The whole cutting process is automatic.

f. After cutting, the body will be sent to the autoclaved kettle by the steamed car.



Main advantages of AAC Cutting Machine:


1. Compact structure, easy operation. Seldom need being repaired;

2. Complete the horizontal cutting and vertical cutting at once time;

3. Cut each side of the body, the cutting precision can meet the requirements of GB/T1 1969-1997.

4. All waste materials shall be reclaimed, by which secondary pollution will not be resulted in;

5. Excellent cutting performance,after cutting, the body won't adhere to each other;

6. The transection adopts lead-screw driving, solving the problem of desynchronize caused by hydraulic transmission;

7. Restrainer and safrty interlock can prevent the accidents by improper operation;

8. We can replace the steel wire quickly;

9. No defective products.



Main technical parameter of AAC Cutting Machine:



Dear buyers, if you have any need or want to know the infromation of our AAC Cutting Machine, plz feel free to contact me by the following contact ifnromation:


Hot Sale At home and abroad AAC Cutting Machine Made by SLTD

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.