Ads by Google
Hot Sell Big Capacity AAC Plant with Competitive Price
The Introduction of process of the plant production line
Dose the raw materials(1), then convey the raw materials to the casting and mixing machine, mix them(2), evenly cast them(3) put the reinforcing bars in the mould(19). After a period of static curring(4), once the green brick gains certain degreen if hardness, it will be conveyed to the cutting machine together with the mould. The turning over sling complete the following works:A, turning over the mould with 90 degrees in the air(5), one side boards becomes the base board to support the green brick intil it is steam cured. B, swing the green brick to the cutting cart or cutting board to demould(6). C the unload mould frame and the returning side board(16)are recombined into mould again. (17) the recombined mould will be cleaned and sprayed with oil for casting again. (18) Each face of the green brick will be cut on the cutting machine step by step: a, cutting the sides of the green brick vertically(7), b, then cutting it crossly(8), at last, cutting the green brick horizontally(9). After cutting, the green brick together with mould base plate are swinged to the steam curing cart(10) and numbered before sending into the autoclave(11) for high temerature steaming curing(12), after steam curing, the bricks are taken out of the autoclave(13), and then swinged to pile up or load it to a car and packaged(15), the side board is sent back to the beginning of the production line(16).
Finished production Pictures
4. Any question, pls feel free to contact with us
Hot Sell Big Capacity AAC plant with Competitive Price