1 feeder 2 the fully closed measuring mixing system 3 gypsum block forming machine 4 catch plate system 5 the manipulator

 China equipment

  The gypsum block China machine includes

 

1 feeder (screw feeder or vertical feeder , anyone is ok,according to the customer's actual situation)2 the fully closed measuring mixing system (won't produce any pollution)3 gypsum block forming machine (won't produce any waste)4 catch plate system5 the manipulator (can palletizing 5 layers gypsum block, to save 4/5 area)6 other auxiliary equipment (control cabinet, hydraulic pressure station, etc.)

 

1. Product specification

 

    1) Length: 666mm

 

    2) Width: 500mm

 

    3) Thickness: 80mm, 100mm, 120mm, 150mm, 180mm, 200mm

 

2. Annual capacity

 

    100,000 m2 - 500,000m2

 

3. Production process:

 

     Metering and weighing section—The building gypsum is conveyed to weighing silo by screw conveyor, when the materials in weighing silo are up to the set value, the screw conveyor will stop conveying.

 

     Forming section—The metered building gypsum is evenly conveyed to a mixer by a flash screw conveyor and the water is conveyed to the mixer by pneumatic valves. The evenly mixed slurry by the mixer will be poured into forming machine, the hydraulic scraper will scrape out the upper surface tongue-and-groove, then hydraulic jacking out the formed gypsum blocks, then space clamp will move blocks to drying kiln car or to be air-cured

 

     Drying and air-cure section—Formed gypsum blocks can be removed moisture by sun or artificial drying which is at buyer’s option.

 

     Packing and storage section—Kiln-dried gypsum blocks can be manually or mechanically packed which is also at buyer’s option

 

4. Final product variety:  

 

    Hollow gypsum block

 

    Solid gypsum block

 

5. Physical property:

 

    1) average density: 800-1,100kg/m3±5(under dry conditions)

 

   2) humidity 6% of maximum residual moisture

 

   3) breaking resistance strength:

 

Thickness under Average Density	Average Load
50mm	1.7KN
60mm	1.9KN
70mm	2.3KN
80mm	2.7KN
100mm	4.0KN

 

    4) bending strength: minimum 2.5KN/m2(maximum bending moment:  >=550Nm)

 

    5) hardness: minimum 5MN/m2

 

    6) wire-resistance: European A1 Standard

 

    7) heat insulation: the heat insulation effect of gypsum block of 1mm thickness equals to brick of 3cm or cement of 4cm or concrete of 5cm.

 

    8) the coefficient of gypsum heat conduction:0.34W/m.K

 

we also can design the gypsum block production line according to the customer requirements, and it can produce the gypsum block with different specification, and we can guarantee the gypsum block specification is precise and beautiful

 

 

 

High quality hollow blocks