Technological process:

1. First, dose and match measured raw materials;

2. After distributing, feed raw material into pouring mixer to make slurry.

3. Through thoroughly mixing, the slurry is poured to mould;,                       

4. After pre-curing under a certain temperature and time, the block would reach a certain hardness and prepare for cutting;

5.Tilting hoister would turn over 90 degrees of mould;

6.Then open the mould and separate it from block. And take the block with side plate to the cutting cart;7.Firstly, the cutting machine vertical cuts blocks from both sides.

8.Secondly the horizontal cutting;9.Finally the vertical cutting;10.After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;

11.Organizing the cut blocks and put them into autoclaves;     

12.Hardening the blocks under certain temperature and pressure;

13.Carry the finished product out of autoclave;    

14. The finished product hoister take the finished product to stock shield;  

15.Packed for loading;

16.The side plate return back through side plate roller;

17. Side plate would be organized with open mould;.

18.Clean the mould and prepare for next pouring;                           

 19.Steel bars processing line for slab production.