H30 Polyurethane Spray Perfusion Equipment & PKIII Gun

Our company has obtained Quality Management System Certificates, such as UKAS and ISO9000. The advanced management system and high efficient and modern production mode provide reliable quality assurance for our products.

JHPK-H30 Polyurethane Spray Perfusion Equipment:

1.    The equipment has obtained CE certification, safe and environmental protection.

2.    Having the proprietary property rights in design and production, several national patents have been applied and approved.

3.    The perfect coaxial structure design of the horizontal booster pump reduces greatly the abrasion of the sealing. There is no pressure difference during operation and the commuting pressure fluctuation value is ideal and stable.

4.    The lubricant inside the anti-solidifying lubricating cylinder circulates with high speed so that the leaked material and impurities could be brought away rapidly. The shaft for black material is always kept in the lubricant avoiding the crystallization.

5.    The delicate coupling structure is easy for the dismounting of the booster pump during the maintenance. When necessary, the complete unilateral raw material pump can be replaced to change the proportion of the raw material.

6.    The pneumatic commuting control assembly is simple in structure and reliable in operation, and enables the pump body operating normally during the lack of electricity.

7.    The design and application of the reset function when shut down realizes the dual protection.

8.    The dual filters of the equipment for both high and low pressure and the filter of the nozzle realize the triple filtration protection for the raw material and reduce the blocking.

9.    The special armoured temperature sensor inside the heater can collect the temperature signal at any time, hence the overshooting value for heating is well controlled.

10.   The flagelliform armoured temperature sensor inside the heating tube makes the collection of the temperature data more sensitive and accurate without signal losing.

11.   The heating tubes adopt special technology for winding the heating copper belt. The heating is even and reliable. The tubes are safe and durable with full closed water-proof connection, as well as the heat insulation layer and anti-abrasion layer.

12.   The accurate action counter makes it easy to have the knowledge of material consumption when stop working.

13.   The compact control panel and the operation hint of key parts make it easy for fast handling and operation.

14.   The equipment frame uses the solid rubber wheel dispensing with air filling which is more suitable for the construction site.

15.   The equipment is of humanization design with low weight, small volume. It is convenient and flexible and can contain 4 groups of heating tubes (90 meters). It can be easily shifted by one person.

Standard Configuration:

Main equipment: 1 set

Nozzle: 1 pc

Heating tube per group: 15 meter (standard)

Max. length (optional): 90 meter

Short tube with nozzle per group: 1.5 meter

Feeding pump: 2 sets

Technical Data:

Proportion of raw material: 1:1 standard fixed ratio (changeable ratio can be selected)

Viscosity range of raw material: 200-1000 CPS (under operation temperature)

Output of raw material: 2-7.8 kg/min

Heating temperature range: 0°C~70°C

Electrical source: 3 phase 4 wire, 380V 50HZ 14A×3+16A

Compressed air: 0.5~0.8Mpa 1m³/min

Output pressure of raw material per group: 5~10Mpa

Dimension: 930mm×800mm×1210mm

Weight: 125Kg

   JHPK-PKIII Perfusion and Spraying Gun

1.    Several national patents with advanced technology and reliable quality.

2.    Compact and reasonable structure, manufactured with high performance lightweight material with total weight only 0.9 kg.

3.    Fission type design for pneumatic part and raw material part avoiding the blocking.

4.    Dual piston design providing more power which guarantees the smooth and flexible operation.

5.    The special pneumatic spring design at sliding bar of the gun replaces easy-worn mechanical spring and guarantees the operation.

6.    The metal abrasion protection is used so that the sealing is more reliable and enhanced the lifetime.

7.    The unique auxiliary pulverization design for air drum efficiently controls the splashing and bouncing of the raw material which can save 15% of the raw material.

8.    Multiple round spraying nozzle, flat spraying nozzle and perfusion nozzle can be interchanged during operation. The applicable scope is more extensive.

9.    The special flat spraying mode is more suitable for the internal angle, external angle, balcony and roofing and convenient for controlling the spraying thickness and sprayed location.

10.   The unique design in the protection cover reduces the frequency in gun cleaning and prolongs the lifetime for 50%.

Technical Data:

Max. fluid working pressure: 24 MPa

Air inlet pressure: 0.4-0.8 MPa

Air tube dia.: Φ10 X1

Working flow: 2-8 kg/min

Type of nozzle: round, flat and perfusion

Cleaning method: self cleaning with air

PU spray machine JHPK manufacturer