HEAT SHRINKABLE CALBE END CAPS
WITH SPIRAL ADHESIVE COATING
Features/Applications
HSEC offers an economical means of sealing the ends of
power cable with a completely watertight seal. The internal
surface of the end caps has a layer of spiral coated hot melt
adhesive , which retains its flexible properties after recovery.
HSEC is recommended for use both in open air and on
underground power distribution cables with PVC , lead
or XLPE sheaths.
Effectively offering protection against oxidation ,
ozone, UV-radiation etc.
Coated with hot melt adhesive to ensure environment seal
Easily to fit over the cable end
Protect power cable up to 1000V and telecommunication cable
Material: thermally stabilized cross-linked polyolefin ,coated with
specially designed hot melt adhesive
Minimum fully shrink temperature: 120°C
Property | Test Method | Typical Data |
Operating temperature | IEC 216 | -55°C to +110°C |
Tensile strength | ASTM D 638 | >10 MPa |
Elongation at break | ASTM D 638 | >400% |
Density | ASTM D 792 | 1.05 |
Elongation at break after aging | 150°C/168hrs | >300% |
Dielectric strength | IEC 243 | >15KV/mm |
Volume resistance | IEC 93 | >1014Ω.cm |
heat shinkable calbe end caps