Heat Shrinkable End Caps
With adhesive in the inner wall
With valve is abailable
Alternative for Raychem SSC/ESC
12-200mm
Heat Shrinkable End Caps
Applications Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
Technical Data |
Property | Test Method | Typical Data | Operating temperature | IEC 216 | -55 to +110 | Tensile strength | ASTM D 638 | 14 MPa | Elongation at break | ASTM D 638 | 400 | Density | ASTM D 792 | 1.05 | Elongation at break after aging | 150, 168hrs | 300 | Dielectric strength | IEC 243 | 15KV/mm | Volume resistance | IEC 93 | 1014Ω.cm |
|
Specification unit(mm) |
Order Ref. Number | Inner Diameter | After fully recovered Length ± 10 | After fully recovered Width ± 10 | Cable diameter | As supplied (min) | After fully recovered (max) | Standard length end cap | HSEC-12/ 4 | 12 | 4.0 | 40 | 2.6 | 4-10 | HSEC-14/ 5 | 14 | 5.0 | 45 | 2.2 | 5-12 | HSEC-20/ 6 | 20 | 6.0 | 55 | 2.8 | 6-16 | HSEC-25/ 8.5 | 25 | 8.5 | 68 | 2.8 | 10-20 | HSEC-35/ 16 | 35 | 16.0 | 83 | 3.3 | 17-30 | HSEC-40/ 15 | 40 | 15.0 | 83 | 3.3 | 18-32 | HSEC-55/ 26 | 55 | 26.0 | 103 | 3.5 | 28-48 | HSEC-75/ 36 | 75 | 36.0 | 120 | 4.0 | 45-68 | HSEC-100/ 52 | 100 | 52.0 | 140 | 4.0 | 55-90 | HSEC-120/ 60 | 120 | 60.0 | 150 | 4.0 | 65-110 | HSEC-145/ 60 | 145 | 60.0 | 150 | 4.0 | 70-130 | HSEC-160/ 82 | 160 | 82.0 | 150 | 4.0 | 90-150 | HSEC-200/ 90 | 200 | 90.0 | 160 | 4.2 | 100-180 |
|
Heat Shrinkable End Caps