1.pneumatic stripping machine
2.Double acting type cylinder
3.The unique type slider, reciprocating stroke smooth.
Technical parameters
Model | Stroke | Peeling Capacity | Air Pressure | Voltage | Power | Cylinder Diameter | Weight | Specification |
HS-305 | 50mm | Max.7mm | 3-7kg/cm2 | 220V/50Hz | 31-73kg | ø40mm | 20kg | 400L*300W*270Hmm |
HS-310 | 100mm | Max.15mm | 3-7kg/cm2 | AC220V/50Hz | 49-115kg | ø50mm | 25kg | 480L*330W*280Hmm |
HS-315 | 150mm | Max.20mm | 3-7kg/cm2 | AC220V/50Hz | 80-195kg | ø63mm | 45kg | 600L*420W*360Hmm |
2012 HOT Pneumatic stripping machineProduct features:1. The design of the type of human engineering is back, accord with human body engineering, speed up the operating personnel speed and quality;2. Double acting type cylinder, no spring concentrations of fracture, strip off line performance is good; By oil, gas subsistence two couplet body, the cylinder timing oil supply, reduce internal cylinder wear and prolong service life;3. The unique type slider, reciprocating stroke smooth, accurate cut off. Small gas type control. Light and quick, easy operation. Adjustable structure, depending on the wire thickness and make adjustments.4. Can control structure, the application of the AC/DC power supply, electronic line, more difficult and special wire, etc.The operating instructions:1. The machine is to use small gas type control, before use, please connected to the power source and the air compressor.2. Before the wire in processing solid line knife inside, and on the back foot pedal switch, beginning but molding.3. Processing wire length of the cutting tools can be a front small cylinder before moving, and after the.4. Such as processing, insider wound to trace the, the knife a cylinder device for after the adjustment.5. If there is a serious skin outside processing wire clip mark to use a clip of the improvements of the cylinder line fine-tuning.6. When operating please pay attention to safety, machines need not when, please turn off the power to avoid friendly fire.7. Wire is not the same size, the tool is different, have to replace any tool use.8. Line in 1 mm below, skin, use solid line and semicircle knife knife is used together.9. Line 1 mm in more skin, use cross V type knife.10. The clip fixture should be the tool and the circular arc line plane of arc cut together, in order to avoid injury and paint.
2012 HOT Pneumatic stripping machine