Aerial ADSS Optic Fiber Cable 1.All-dielectric adss cable 2.communication aerial optic fiber cable 3.FRP strengthmember cable

Aerial ADSS Optic Fiber Cable 

I.Aerial ADSS Optic Fiber CableDescription

The fibers ADSS, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes of ADSS are filled with a water-resistant filling compound.A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. Then the ADSS cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.A layer of water-blocking material is applied around the cable core to prevent water ingress all the same. After a corrugated steel tape armor is applied. the aerial optic fiber cable is completed with a PE outer sheath

 II.ADSS  Aerial Optic Fiber Cable Charateristics

Good mechanical and temperature performance Aramid yarn strength member ensures good performance of tensile strengthHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protectio of fiber Crush resistance and flexibility Single Fiber Reinforced Plastic as the cntral strength member Loose tube filling compound cable100% cable core filling

III.ADSS  Aerial Optic Fiber Cable Feature

The aerial optic fiber cable can be installed without shutting off the powerExcellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kVLight weight and small diameter reducing the load caused by ice and wind and the load on towersand backpropsLarge span lengths and the largest span is over 1000mGood performance of tensile strength and temperatureThe design life span is 30 years   ADSS cable complies with Standard YD/T 901-2001as well as IEC 60794-1.Storage/Operating Temperature : -40°C to + 70°C

ADSS Aerial Optic Fiber Cable Structure

Aerial cable ADSS Fiber optic cable