Inlet diameter(tensile strength) : 2.0-Max.2.6mm
Outlet diameter : Φ0.25-Φ0.80mm
Number of produced wires : 8 X copper bare i.e. copper tinned(1 L
evels, with 8 wires)
Drawing speed : Max. 28 m/s
Drawing passes : Max. 22
Drawing rings : 100mm with 8 grooves,
For separate and parallel wire guidance
Material: tungsten carbide or zirconium oxide
Wire elongation : 19 x 25% /3 x 18.18% three quick die change adjustable
Drawing dies : φ max. 28mm alternatively φ = max. 25.4 mm
max. 12 mm thickness
Compressed air supply : 6 bar overpressure (7 x 105 Pa), water- and oil free
Bobbin : DIN 630 ( Drawing will be provided by users)
Operation direction : from left to right
Noise level :< 85 dbA (Except for main motor )
Production efficiency : 8 X φ 0.250mm at v = 28.0m/s
8 X φ 0.300 mm at v = 25.0m/s
8 X φ 0.400 mm at v = 23.0m/s
8 X φ 0.500 mm at v = 20.0m/s
8 X φ 0.600mm at v = 16.0m/s
8 X φ 0.700mm at v = 10.0m/s
8 X φ 0.800mm at v = 5.0m/s
Production efficiency for tinned wires at production speeds reduced by about 20%.
8-wire drawing machine