simple structure & operation,conveniently processing of cable wire copper can be rolled (agent pressure) or broken by blade

Item  NO.	Y-003
Model	Z918-2
Name	single channel strip machine (9 feed holes)
Scope of application	diameter 1.5mm -38mm
Dimensions	83cm*52cm*53cm
Weight	60kg
Voltage power	220 / 1.5KW220V / 2.2kW380V / 1.5kw
Daily output	100kg - 300kg
Functions and features	The machine is with simple structure and operation and is used conveniently. The processing of cable wire copper wire can be rolled (agent pressure) or broken by blade, while other cables must break insulation layer by blade, and then remove the copper.

1. Start the motor, check if the operation is normal. When feeding, check the diameter dimension of the cable wire with outsourcing plastic and rubber. And then please feed one by one.

2. In order to make the blades durable, please cut off the joint of cable wire when feeding, to avoid the gap of blade collapse.

3. If the cable wire is stripped over deep or the wire is broken, please attention to the following points:

(1)You should adjust the feeding file(that is M12 screw on both sides of the shaft above the blade)

(2) when feeding check whether the position is right or not.

 

Single Channel Cable Stripping Machine (9 Feed Hole)