Fine Wire Drawing Machine1.Inlet :0.15-0.40mm2.Outlet:0.05-0.12mm3.Capacity :160kg/24hs(0.1mm)4.Speed :2000MPMM
SPECIFICATION
1. MAIN TECHNICAL PARAMETER
1.1 | Inlet wire | Φ0.15~0.4mm |
1.2 | Outlet wire | Φ0.05mm~φ0.12mm |
1.3 | Control type | Dual Inverters |
1.4 | Cotrol system | Traditional analog type |
1.5 | Max speed of drawing | 2000m/min |
1.6 | Drawing block size | Φ199mm |
1.7 | Max number of passes | 20 |
1.8 | Drawing Dies NO.: | 20 |
1.9 | Slip Ratio of M/C | 10.5% |
1.10 | Fix Speed capstan slip ratio | 6% |
1.11 | Frame: | Ironed cast |
1.12 | Capstan : | Ceramic plasma or tungsten |
1.13 | Fix speed capstan dia.: | 120mm(max) |
1.14 | Spooler dia.: | 120mm(max) |
1.15 | Take-up type: | Shaft type |
1.16 | Transmission type: | Flat belts |
1.17 | Tension control | Weight balance type |
1.18 | Brake | Megnetic brake |
1.19 | Main motor power | 3.7kW |
1.20 | Power of motor for dual-reel take up | 2.2kW |
1.21 | Loading capacity: | 30KG |
1.22 | Main power | 380v-3P-50/60Hz |
1.23 | Weigh | 1400kg |
1.24 | Dimension | 1900x1350x1750mm |
30D Fine Wire Drawing Machine(Wet Model)