Ads by Google
Intermediate wire drawing machine with annealer
Sepcification
High speed medium wire drawing machine
| Machine type | 17MD |
| Inlet diameter (mm) | Φ3.2-Φ2.5 |
| Outlet diameter (mm) | Φ1.8-Φ0.4 |
| Transmission type | Transmits by high precision gear |
| Drawing line speed (m/min) | 2000 |
| Model outside dia (mm) | Φ25 |
| Slio ratio of m/c | 15% |
| Fix speed capstan slip ratio | 13% |
| Capstan dia.(Max.) (mm) | Φ260 |
| Fix speed capstan dia. (mm) | Φ260 |
| Main motor (kw) | 55 |
| Machine dimension (mm) | 2100*1022*995 |
| Machine weight (kg) | 3500*1200*1250 |
Medium wire drawing with continuous annealer
| Machine type | 17MDT |
| Annealer method | DC.three-section annealing |
| Diameter of annealled wire (mm) | Φ0.4-Φ1.6 |
| Max. annealing speed (m/min) | 1500 |
| Diameter of copper wheel for annealer | Φ250 |
| Max. volt for annealing (V) | DC60 |
| Max. current for annealing (A) | DC1600 |
| Steam (kg/h) | 10-12 (0.2-0.3Mpa) |
| Cooling water (m³/h) | 12.0-18.0 |
| Compression air (m³/h) | 10-15 (0.4-0.6) |
| Machine dimension (mm) | 1000*1400*2450 |
| Machine weight (kg) | 2000 |
Usage:
The machine is used for drawing aluminum rod from 2.5-3.2mm to 0.4-1.8mm.
Advantage
1. Traction by high precision gear
2. Capstan treated with wear-resistan spray
3. Low noise, less then 85db
4. Lubricating transmit device under the lubricator, separated with gear box
5. Double ineverter control, tension auto adjusting
6. Unify 250 cast-iron main frame, precision machinery, no shock, no deformation
7. Suitable for take up machine with and without shaft, vertical plum blossom take up machine.
Payment:
Terms:30% by TT as advanced,70% by TT before shipment.
Package:
1) We usually use wooden cases
2) If Marine transport needs long time, we advice using PE packaging or water proof
material on the outside of wooden cases.
3) We can also meet customers' requirements in the transport.
Intermediate wire drawing machine with annealer