Ads by Google
1, environmental protection. It is in line with national energy-saving, environmental protection policy.2, beautiful. Wear-resistant material, the appearance of light, feel good.3, anti-counterfeiting. Effectively combat counterfeiting, to maintain the brand image.4, comes with the goods: a thoughtful and elegant gloves, sturdy and practical instructions.5, small size, light weight: Due to metalized polypropylene membrane as medium, size, weight of only older products, 1 / 4 and 1 / 5. 6, low loss: less than 0.1% of actual value, so the capacitor's own low energy consumption, less heat, low temperature, long service life, good energy-saving effect.7, excellent self-healing properties: over-voltage caused by the media, local self-healing breakdown quickly and resume their normal work, so that greatly improved reliability.8, security: built-in self-discharge resistance and the device. Capacitor discharge resistor can automatically vent let go of power brought; when the capacitor fails, the safety device in time to disconnect the power, to avoid the failure of further development, to ensure safe use.9, no oil spill: The use of advanced semi-solid capacitor impregnant, drop melting point higher than 70 °C, in the course is not spill to avoid environmental pollution, the capacitor will not result in oil loss and failure. Primary Specifications conditions: ambient temperature -25 °C ~ +50 °C, humidity ≤ 85%, an altitude of 2000 meters. Rated voltage: 250VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC. Rated capacity: 1 ~ 100kvar. Capacity tolerance: -5 ~ +10% Dissipation factor: rated voltage in the frequency, 20 °C when tgδ ≤ 0.1%. AC withstand voltage: 2.15 times rated voltage between poles 10 seconds, most shell between 3kV10 seconds. Maximum allowable over-voltage: 1.10 times rated voltage. Maximum allowable over-current: 1.30 multiples of the rated current.Self-discharge characteristics: plus 2 Un capacitor DC voltage, disconnect the power after three minutes, the remaining voltage down to 75V or less.Standard: GB12747-2004 IEC60831-1996
typeBSMJBCMJBZMJLCMJ | RatedvoltagekV | Ratedoutputkvar | TotalcapacitanceμF | RatedcurrentA | DimensionsL × W × H(mm) |
| 0.25-3-1 | 0.25 | 3 | 153 | 12 | 167×57×110 |
| 0.25-5-1 | 0.25 | 5 | 255 | 20 | 167×57×180 |
| 0.25-7.5-1 | 0.25 | 7.5 | 382 | 30 | 160×85×210 |
| 0.25-10-1 | 0.25 | 10 | 509 | 40 | 270×120×210 |
| 0.25-15-1 | 0.25 | 15 | 764 | 60 | 270×120×210 |
| 0.25-20-1 | 0.25 | 20 | 1019 | 80 | 270×120×210 |
| 0.25-25-1 | 0.25 | 25 | 1273 | 100 | 270×120×210 |
| 0.25-30-1 | 0.25 | 30 | 1528 | 120 | 270×120×230 |
| 0.25-35-1 | 0.25 | 35 | 1783 | 140 | 270×120×230 |
| 0.25-40-1 | 0.25 | 40 | 2037 | 160 | 270×120×230 |
Hot Selling metallized polypropylene(mpp) film power capacitor