1.R Vol :415V 2.R Capacity:1,2,3,4,5,6,7.8,8,10,12.5,15,16,18,20,22,24,25,30,40,50,60 and so on .

  1.General description

      “JIUSHE BRAND”  Self-healing Type Low voltage shunt capacitors adopt metallized film as medium,has low loss,low temperature rise and excellent self-healing performance.The Capacitor is mounted with discharge resistance and pressure type explosion protection inside,it is safe and reliable. This self-healing power capacitors are mainly used for parallel connection with low voltage grid to increase power factor,decrease reactive loss,improve voltage quality,is a new type energy saving products  whihc is recommended by the country.

2.Main feature

  Small volume and light weight

It is only 1/4 and 1/5 of the weight and the volume of the outdated products.

  Low loss

 the actual value loss than 0.1%,the capacitor itself has low consumption of energy,little radiation,low temperature rise,long service life,and good energy conservation.

   Excellent self-healing performance

When a part of the isolation is ted through due to the over voltage,it is capable of self-healing so as to contiue the normal operational,therefore the raliability is improved greatly.

   Safety

 Equipped with self-discharging resistant and safety devices inside,it is safe and reliable.

   Without oil leakage

In order to avoid oil leakage during operation so as to protect the environment,it employs the microcrystalline wax as the impregnant,which remains solid state at noraml temperature and has a drip-melting point higher than 70°

3.Main technical parameter

   Working conditions:Altitude: no more than 2000m;Ambient temperature:-25°C~50°C;Humidity: less than 85%;

   Installation site: no harmful gas,no explosive dust;

   Rated frequency: 50/60Hz;

   Rated voltage: 110VAC~1000VAC;

   Rated capacity: 1Kvar~60Kvar;

  Capacity tolerance:-5~+10%;

  Tangent of the loss angle:under the power frequency rated voltage

  Withstand voltage inter-electrodes:

  withstand voltage between the pole and the housing:3.6KV 3S

  Insulation:500V DC , > 1000M in 1 min

  Max permissible over-voltage: 1.10 In of the rated voltage.

  Max permissible over-current: 1.30 In of the rated current.

  Self-discharging characteristics:  cut off  the power ,  after  3 min, the residual voltage is less than 50V.

  Implementation standards: in conformity with GB/T12747.1-2004 IEC60831-1:1996

  

No	Model	rated voltage KV	rated capacity KVAR	rated capacitance uf	rated current A	case dimension       mm	installed dimension mm
1	BSMJ0.415-1-3	0.415	1	18.5	1.4	150×54×135	147×34
2	BSMJ0.415-2-3	0.415	2	37.0	2.8	150×54×135	147×34
3	BSMJ0.415-3-3	0.415	3	55.5	4.2	150×54×135	147×34
4	BSMJ0.415-4-3	0.415	4	74.0	5.6	150×54×135	147×34
5	BSMJ0.415-5-3	0.415	5	92.5	7.0	150×54×135	147×34
6	BSMJ0.415-6-3	0.415	6	110.9	8.3	150×54×135	147×34
7	BSMJ0.415-7.5-3	0.415	7.5	138.7	10.4	180×64×115	185×44
8	BSMJ0.415-8-3	0.415	8	147.9	11.1	180×64×135	185×44
9	BSMJ0.415-10-3	0.415	10	184.9	13.9	180×64×135	185×44
10	BSMJ0.415-12.5-3	0.415	12.5	231.1	17.4	180×64×185	185×44
11	BSMJ0.415-14-3	0.415	14	258.9	19.5	180×64×185	185×44
12	BSMJ0.415-15-3	0.415	15	277.4	20.9	180×64×185	185×44
13	BSMJ0.415-16-3	0.415	16	295.9	22.3	180×64×185	185×44
14	BSMJ0.415-18-3	0.415	18	332.8	25.0	180×64×220	185×44
15	BSMJ0.415-20-3	0.415	20	369.8	27.8	180×64×220	185×44
16	BSMJ0.415-22-3	0.415	22	406.8	30.6	180×64×220	185×44
17	BSMJ0.415-24-3	0.415	24	443.8	33.4	180×64×220	185×44
18	BSMJ0.415-25-3	0.415	25	462.3	34.8	182×86×220	200×50
19	BSMJ0.415-30-3	0.415	30	554.7	41.7	182×86×270	200×50
20	BSMJ0.415-40-3	0.415	40	739.7	55.6	182×86×330	200×50
21	BSMJ0.415-50-3	0.415	50	924.6	69.6	270×120×230	290×66

Any technical questions or  others, welcome to contact us

Capacitor