Ads by Google
The bumper main body | |||||
Manufacturing technique: | Blow molding | ||||
Material: | High-qality ABS and PC alloy | ||||
Shock resistance: | 20KJ/M2--16KJ/M2 | ||||
Tensile strength: | 52(50mm/min) | ||||
Surface hardness: | 73(2mm/min) | ||||
Bending modulus: | 2590(2mm/min) | ||||
Main advantage: | Get ISO/TS16949 certification | ||||
Independent design and development to ensure originality | |||||
Automatic spray paint production to ensure paint quality | |||||
One-time blow molding ensure product height consistent | |||||
Chromium-plated part | |||||
Manufacturing technique: | Injection moulding +chromeplate | ||||
Material: | Advanced Electroplating level ABS | ||||
Tensile strength: | >40Mpa | ||||
Bending strength: | >65Mpa | ||||
Distortion temperature: | >92°C | ||||
Elongation rate : | >15% | ||||
Production process | |||||
1.Scan the car body engineering data. | |||||
2.Design and manufacture mould according to engineering data. | |||||
3.Automatic blow molding and Injection moulding ensures conformity in production. | |||||
4.Automatic spray paint and chromate treatment | |||||
5.Strictly according to quality control system inspect and test |
Dimension:132*56.2*28.5(cm) (both front and rear bumper in one carton box) | Gross weight:11KG | FOBchongqing USD160 for both front and rear bumper |
Accessories for NISSAN QASHQAI 2009 and 2010 front bumper