2012 new product! car aluminum case isolation power adpater
Product parameter
product name | Aluminum isolation power |
Input voltage | 9-32v(Rated 24VDC) |
Output voltage | 13.8VDC(13.2-13.8V) |
Output current | 10A(Largest 15A) |
Output power | 180W |
Transfer efficiency | >=80% |
Size | 122*107*42(mm) |
Work enviroment | work temperature:-20-85 degrees(relative dumity 10-90%) Storage temperature:-40-85 degrees(relative dumity) |
Picture for reference:
Usage
1.Keep the converter in ventilation and dry environment.
2.Connect 24V input side to power connector. The section of wire should be no less than 2.5mm2.
The red wire is with anode, the black one is with cathode.
3.Connect 12V output side with the appliances. The section of wire should be no less than 2.5mm2.
The red wire is with anode, the black one is with cathode. The current of the equipment should be
less than the rated current of converters.
4.Switch on the electricity to power the converters, the indicator turns on.
5. Turn on the equipment, it will work normally.
Attention
1.Please don't connect this product with the electrical appliance whose power is larger than the rated
one to avoid any fault.
2.Don't use this product for long time when the engine stops, otherwise the car can’t be started because
of the low voltage of the car battery.
3.Please follow the instruction of electrical appliance strictly during operation.
4.Don't use this product in high-temperature, moist and dusty environment.
5.Don't disassemble and modify this product personally
2012 new product! car aluminum DC 24v to DC 12v 30A car power converter