Welcome to ECVERY
TLT235SB Economical Floorplate Two Post Hydraulic Car Lift
TLT235SB Economical Floorplate Two Post Hydraulic Car Lift
Supplier Info
[China Supplier]
Contact Person : Ms. liang sandy
Tel : 86-20-86554105
Fax : 86-20-86566830
Product Detail
two post hydraulic car lift 1.Lifting Capacity:3.5T 2.Liting Height:1950mm 3.Lifting time:50sec 4.Lowering time:40sec

TLT235SB Economical Floorplate Two Post Hydraulic Car Lift  

 Introduction:

 Economical Floor Plate Two Post Lift (Rated Capacity: 3.5Ton)

Feature:

 1.Dual hydraulic cylinders drive, stable lifting and lowering. Adopt two steel cables for equalization, force two carriages to move synchronously.2.Manual lock release mechanism on both sides3.Carraige travels in the column through slide blocks.

Specification:

Rated capacity(kg)

3500

Lifting height(mm):

1950

Lifting time(S):

50

Lowering time(S):

40

Motor power(kw):

2.2

Passage width(mm):

2486

Overall width(mm):

3370

Overall height(mm):

2860

Bottom clearance(mm):

110

Function Improvement

ItemNotes on ImprovementUpdate Date
 Lock release plate assembly improvement on SB,SC seriesThe original lock release plate has the possibility of stucking in the column. The components dimension of the plate has been modified to avoid this problem. 2011-3-12
 Limit switch position adjustableThe limit switch installed inside of the column wall and activated by the carriage will be fixed on an adapter plate with oval hole to make its position adjustable.(Notes:The limit switch is not a standard part,optional per user's request) 2011-1-30
 Create a hole of 50 on both columnsIn order to meet the after-service peoples requirement,there are two 50 holes on columns for lock release device reparing and maintenance( one hole on each column) 2010-12-13
 The sheave seat of TLT235SB is changed from weld part to casting partFor decreasing the cost ,the sheave seat will be changed to casting part ,It will not effect the function of the machine. 2008-12-9
 Unite the holes on the two-post liftUnite the holes on the column to simplify the processing,It won,t effect the function of the machine. 2008-12-2
 Changes of round rubber pad hole positionAdd shims to the installation holes ,Bottom is flat ,add shims to 8 installation holes and flat washer 8 2008-6-27
 M36 hexagon thick nut of support seat changedAccord to the feedback,TLT235SB M36 hexagon thick nut of support seat change to the reguular chamfered edge style,the period of delivery is decreased. 2008-4-1
 Changes of steel cable for safety lock for series TLT two liftAccording to the customer requests ,we add some retaining rings on the rubber pad supporter in order to protect the cable of one side manual safety lock on AT not to slide off ,The carriage of flool-clear two-post lift can be installerd nore convenient 2007-11-26
 Increase the shims to the carriage for series two-post liftFor well-adjust,the list of carriage (except TLT245ST SK2030)adds:TLT235SB shims I for sliding block(galvanization) ,Q235-A,TLT235SB-20-12-A,code:201010987,number:1 2007-11-5
 Door rubber pad of 2-post lift have been changedDoor rubber pad reduce weight and add groove 2007-1-19
 Processing changes for partsChange being 1,Round plate adding welding outside zinc coating2,Push rod adding welding outside prcessing3,Screw adding outside processing 2007-1-18
 Change of HP hoseThe length of HP hose is changed form 1440mm to 1240mm 2006-12-19

TLT235SB Economical Floorplate Two Post Hydraulic Car Lift

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.