Installation Guides 1. Get out the license light; 2. Get the rear view lens lines across the license light original position; 3. Fasten the camera with the buckle which place in the two sides of the camera; 4. Connect the lens built-in license light power lines to the original license light power lines; 5. Connect the reverse lens switching lines; 6. Connect the camera's signal line to the signal extension line; 7. Connect the car's reverse light line to camera's video cable; 8. Check if all lines are correct connected and arranged; 9. Debug the working effects of the camera and the license light; 10. Cover the car trunk. Finished. |