steel mould: 1. According to standard ASTM, EN, DIN, JIS, or sample, or drawings. 2. Best selling in Europe, America steel mould   is a cast iron mould which is used for solidification of molten steel in order to form a special  ingot.  Ingot mould is an essential and turnover bulk producing equipment. It impacts both the outsurface and inner quality of the ingots.       1. Material: cast steels GS45 DIN1681     2. Mechancial properties:

Tensile strength	min. 230MPA
Yield strength	min.450MPA
Elongation	Min.20
Reduction of area	Min.35

    

   3.Delivery condition: normalized 

 

   4.Quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.The standard documentation ensures the full traceability of every process step:Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,Mechanical properties and non-destructive examination;Dimensional check supported with a “as-built“ sketch;Record of the quality heat treatment

steel mould