Ads by Google
Best for general purpose.used in the front seconds of good mills and in the rear stands of common mills.
Recommended applications of grade for carbide roll rings:
Grade | Density (g/cm³) | Hardness (more than HRA) | Strength (Mpa) | Recommended application |
YGH20 | 14.30-14.50 | 86.5 | 2500 | Maximum hardness,excellent wear resistance.used in the last 1-2 stands of good high speed bars. |
YGH25 | 14.10-14.30 | 85.5 | 2520 | Higher wear resistance.moderate impact resistance in the series.used in the last 1-3 stands of good high speed bars. |
YGH30 | 13.90-14.10 | 84 | 2520 | Moderate wear resistance and impact resistance.Good for general purpose.used in the last 1-4 stands or all stands or finishing mills. |
YGH40 | 13.60-13.80 | 83.5 | 2570 | Best for general purpose.Used in the front stands of good mills and in the rear stands of common mills. |
YGH45 | 13.45-13.65 | 82.5 | 2570 | Used in the first and second stands of finishing mill and in the stands of pre-finishing rolling mills . For every milling lines for low speed rolling, low precision and unstable operation. |
YGH55 | 12.90-13.10 | 81 | 2570 | Maximum binder content in YGH series Good toughness and thermal crack resistance.used in the stands of pre-finishing rolling mills and for roll rings for hot rolling of cribbed steel. |
manufacture tungsten carbide nip rolling for steel works