2.4GHz 2500MW 6 Channel Digital Wireless AV Transmitter and Receiver for CCTV Surveillance
Product Description
Performance Indicators:
Working Frequency Bands: 2350-2550MHz
Channels Available: 6
Visual Signal Format: PAL/NTSC
Audio Input Impedance: 1kΩ
Visual Input Impedance: 75 Ω
Power Supply: DC 9V
Dimensions:90mm x 65mm x 25mm
Effective Range: 1500M
Installation:Open the packaging box. The one marked “TX” is the transmitter, and the one marked “RX” is the receiver.
Transmitter Installation:
1. Select the working channel.
2. Use the audio and video cable to connect the transmitter to audio and video signals.
3.Set up the antenna.
4.Plug the power adaptor into an electrical outlet to transmit its direct current to the transmitter.
Receiver Installation:
1. The receiver can be installed according to the same procedure for installing the transmitter.
2. The working channel should be the same as the one for the transmitter. The audio and video should be connected to the television or monitor.(AS indicated in the diagram)
3.After the transmitter and receiver have been installed, observe the reception results.
4.Adjust the antenna angle of the transmitter and receiver until the best sound and image are obtained.
5.The device provides six channels for selection. To switch to another channel, push down the channel switch by one notch.
6. Each transmitter has a fixed working frequency; no two frequencies share the same.
Reception by scanning on one receiver allows the user to monitor multiple scenes. To monitor multiple scenes, simply push down the selection switches of all related working frequencies (up to six scenes can be monitored simultaneously).
Item Includes:
1 x Receiver and Transmitter
2 x Power Adaptors
2 x Audio and Video Cables
1 x Copy of Users Instructions
2.4GHz 2500MW 6 Channel Digital Wireless AV Transmitter and Receiver for CCTV Surveillance