Ads by Google
Feature 1.The device is capable of receiving and transmitting Video signals over UTP wire without using the power supply. 2.Enables cost-effective,point to point transmission appliance,Adopts twisted Pair wiring,providing low cost and easily obtainable. 3.Provides noise interference restrain design and permitting stable images. 4.The Max receiving and transmitting distance is 600M 5.Built-in transient protection design,needless to use a ground connection.
Specifications:
Model No. | VB-202E | ||
Video | Frequency Respons: DC-6Mhz conmmon-mode Differential-Mode Rejection: 15Khz 6Mhz 60dB type | ||
Transmission Distance | BNC(Male) | ||
Video Format | Max.600M(BW) | ||
Operation Frequency Range | NTSC/PAL/CCIR/SECAM | ||
Twisted Pair Connector | DC-10MHz | ||
Common Mode Rejection | One pin Connector | ||
Input Impedance | Coax, Male BNC: 75ΩUTP (screwless) terminal block UTP RJ45 Data Connector: 75Ω | ||
Output Impedance | Coax, Male BNC: 75ΩUTP (screwless) terminal block UTP RJ45 Data Connector: 100Ω | ||
Wire Type | One Unshielded Twisted Pair 24-16AWG (0.5-1.31mm) Per Video Signal: DC loop resistance 52 ohms per 1000 ft (18 ohms per 100m) | ||
Operation Temperature | 10°C ~ +50°C | ||
Humidity | 0-98%(non-condensing) | ||
Dimension | 7CM*8CM*2.5CM | ||
Weight | 0.061kgs/pair |
Conductor DC Resistance(Two Line)
Distance(ft) | 18AWG(Ω) | 20AWG(Ω) | 22AWG(Ω) | Cat 5 24AWG(Ω) |
500 | 6 | 10 | 16 | 26 |
1000 | 13 | 20 | 32 | 51 |
1500 | 19 | 30 | 48 | 77 |
2000 | 26 | 41 | 65 | 103 |
3000 | 38 | 61 | 97 | 154 |
4000 | 51 | 81 | 129 | 205 |
5000 | 64 | 102 | 161 | 257 |
6000 | 77 | 122 | 194 | 308 |
7000 | 89 | 142 | 226 | 359 |
8000 | 102 | 162 | 258 | 411 |
9000 | 115 | 183 | 291 | 462 |
10500 | 134 | 213 | 339 | 539 |
12000 | 153 | 244 | 387 | 616 |
*Specification may be changed without notice!
1 Channel Passive Receiving and Transmitting Video Signal UTP Video Balun