Ads by Google
ROBUSTSECU CCTV Tester
Chinese/English Multi-function RTS-301
2.8 inch High definite LCD Chinese display + PTZ controller + image producer+ network cable testing function
The tester is a professional testing tool which is exploited for video monitory scenes installation and maintain. It's have multi functions including display video, PTZ control, image producer, and network cable testing. It's simple and easy for operation, convenient for carry, economical for save money, is a good assistant for workers.
Application Area:
Video monitoring projects installation and maintain
High speed Dome camera testing and camera testing
Transmission channel testing of video
Control PTZ protocol
RTS-301 CCTV monitor tester
Features:
Low power consumption, 10 hours working timeChinese / English operate menu, simple, easy and beautiful
The brightness, contrast ratio, color saturation are adjustable
NTSC / PAL auto identify and adjust
Image producer can sent various modes of color images (white, yellow, cyan, green, pink, red, blue, black )
Catch and display PTZ control protocol code Enhanced network cable testing function, can testing any two or more connect linear ordering, and display cable number
Support more than 20 kinds of protocols, including Pelco-D, Pelco-P, Samsung etc.
Support RS232, RS485 ports, speed rate 150 ~ 19200/bps
Built-in Lipo battery to supply power, more convenient and stable
Small and simple, image display and data control at the same time
Professional design, easy for carry and use, operator almost can use it directly without training
One person can operate it to finish the testing, aim and focus of camera, you can test and verify every camera and needn't to back to monitoring center, save your time and improve working efficiency.
VIDEO SIGNAL TESTING | ||
Video mode: | PAL / NTSC auto adjust | |
Video signal: | 1Vpp | |
Display screen: | 2.8 inch LCD color display screen, 960 X 240 resolution | |
Display screen adjust: | The brightness, contrast ratio, color saturation are adjustable | |
Video input: | 1 BNC isolation input | |
Video output: | 1 BNC drive output | |
PTZ CONTROL TESTING | ||
Communication port: | Support RS323, RS485 at the same time | |
Communication protocol: | Compatible with more than 20 kinds of protocols: Pelco_D, Pelco_P, Samsung, Panasonic, Lilin, Yaan etc. | |
Baud rate: | 150, 300, 600, 1200, 2400, 4800, 9600, 19200 bps | |
COLOR IMAGE PRODUCER | ||
Video signal producer: | Through video out port, sent color image video testing signal | |
UTP NETWORK CABLE TESTING | ||
Network cable testing: | Testing any two or more connect linear ordering, and display cable number | |
PROTOCOL CODE CATCHING | ||
Protocol code catching: | Can receive and display RS485 / RS232 protocol data from control equipment | |
POWER | ||
Power supply: | DC 5V (2A) | |
Battery supply: | Built-in Li-ion battery of 3.7V, capacity 2000mAh | |
Charging: | Need 3 ~ 4 hours to charging, and can use 10 hours after full charging. | |
Save power function: | Low power consumption, auto stand by can save power, it's can display battery data | |
SYSTEM DATA | ||
Operating set: | Chinese / English OSD menu, optional | |
Auto stand by: | Turn off / 5 ~ 60 minutes | |
Keyboard voice: | ON / OFF | |
OTHER DATA | ||
Working temperature: | -30°C ~ +70°C | |
Working humidity: | 30% ~ 90% | |
Size: | 170mm(L) X 99mm(w) X 48mm(H) | |
RTS-301 CCTV monitor tester