Product appearance size and definition feet wiring figure
NEXTCHIP 2040+SONY 633
32mm*38mm
Feet definition
Electrical performance
1. Using guiding
(1) Please note use environment when deliver use, prevent electrostatic damage.
2. Electrical performance(modulus)
Items | Min | Standard | Max | Units | Notes |
Operating Voltage | 7 | 12 | 14 | Vdc |
|
Operating Temperature | -10 | 25 | 45 | °C |
|
Storage temperature | -20 | 25 | 65 | °C |
|
Wet degree |
|
| 85 | %RH |
|
3. Electrical performance(Video-output level)
Items | Min | Standard | Max | Units | Notes | |
Video-output level(75) | Sync | 257 | 286 | 315 | mVp-p |
|
Video | 643 | 714 | 785 | mVp-p |
| |
Pulse | 257 | 286 | 315 | mVp-p |
|
4 Specification parameters
Signal System | PAL | NTSC |
Model | XK-NX480P | XK-NX480N |
Scanning | 2:1 bank scanning | |
Sync | Internal Sync | |
Horizontal frequency | 15.734kHz | 15.625kHz |
Vertical frequency | 59.94Hz | 50.00Hz |
Horizontal Resolution | 480TVL | 480TVL |
Video-output | 1.2Vp-p | |
Burst Level | 0.3Vp-p~0.33Vp-p | |
SNR | 48dB/60dB | |
Minimum illumination | 0.1Lux of F1.2 | |
Automatic gain control | +18dB | |
White balance | 3200~10000°K | |
Outside control for turning black and color | YES | |
IR-cut filter | YES | |
Electronic control | 1/50(1/60)~1/100000 sec | |
Power Consumption | 80mA | |
Inch | 38mm*38mm*1.0mm | |
Damage | As rule |
5. Working principle
Caution
* Before use, please carefully check each strip function, avoid human damage
* This camera is only DC12V power supply, if use the ac power input will cause camera plate burned.
* Before use, please confirm input voltage is DC12V, if want to use higher voltage ,add an external circuit voltage, otherwise, it will cause the trigger damage
* Please don't do changes without authorization to trigger circuit, otherwise, it will cause the trigger damage
* After leaving factory (Changeable )
1,Abnormal picture 2,Insufficiency 3,Lack of components
* After leaving factory (Changeable with fee )
1,Check it does not work properly for excessively high voltage burned components
2,Man-made damage, short circuit, devices in burned ,leading to not work
3,Changes the trigger circuit without authorization or improper installation leading the damage
4,Using the ac power input leading the damage
camera board