Welcome to ECVERY
T8/T5-35w with reflector
T8/T5-35w with reflector
Supplier Info
[China Supplier]
Contact Person : Mr. Yang Limin
Tel : 86-571-26237079
Fax : 86-571-26237070
Product Detail
T8/T5-35w with reflector: CE, EMC, SAA, C-TICK , ROHS, TUV and ISO9001 Lifespan: 15,000hours , 20.000hours , 30,000hours

T5 Adapter ( T5 adaptor) (T8 toT5) ( T8/T5 ) (T5 Conversion Kit ) Energy Saving fluorescent Light

1)     With the same working wattage, adaptor is more brighter than others.

2)     Lifespan optional : 15.000,hours , 20.000 hours , 30.000 hours  and 42.000 hours (5 years)

3)     Power factor ( PF ) more than 0.99, and 30.000 hours  42.000 hours (5 years) reach to 0.999

4)     All  required  certificates:  CE,  EMC,  SAA, C-TICK , ROHS, and ISO9001

5)     With intelligent warm start,  which gives 2 times longer lifetime for adaptor

6)     Capacity optional : gives  49.7 watt to a  49w lamp tube , gives  36.7 watt to a  35w lamp tube , give 27.5 watt to a 28w lamp tube , give 22.3 watt to a 28w lamp tube

7)     Voltage optional: 110v ,120v, 220v ,230v , 240v , 277v, and 347v

8)     The total current harmonic distortion (THD) in 7%-8%

9)     Electronic ballast provide constant light output for mains voltage of 156-256VAC

10)   EOL ( end of life detection) it recognises end of lifetime and switches off lamp tube and electronics.

11)  Cut off  technology:= intelligence  that  takes care of optimal energy-use and  safety.

12)  Reflector optional : high parabolic reflector, lower parabolic reflector and without reflector

13)  No flammable material, house is 0.5mm thick powdered aluminium, painted white to reduce static , weight is less than 1kg.

14)  50% saving on energy, compared with T8 tube.

15)   Environmental friendlier. Solid mercury, 38% less glass compared to T8.

16)  Improved  light quality , no stroboscopic flickering, which usually causes headache and irritated eyes.

17)  The electronic ballasts should complied to the following standards:

EN 60928/IEC 61347 – General and safety requirements

EN 60929 – performance requirements

EN 55015 – Limits and method of measurement of radio disturbance characteristics

of electrical lighting and similar equipment

EN 61000 – 3 – 2 – Limits for harmonic current emissions

EN 61000 – 3 – 3 – Limits for voltage fluctuations and flicker in low voltage supply

systems for equipment with rated current

EN 61547 - EMC immunity requirements

T8/T5-35w with reflector

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.