Welcome to ECVERY
Gongyi Hanhe autoclaved aerated concrete machinery
Gongyi Hanhe autoclaved aerated concrete machinery
Supplier Info
[China Supplier]
Contact Person : Ms. Wang Jenny
Tel : 0086-371-64250189,15188318176
Fax : 0086-371-64250986
Product Detail
1.Large capacity Autoclave Aerate Concrete(AAC Plant) 2.ISO Autoclave Aerate Concrete 3.Low cost Autoclave Aerate Concrete

Gongyi Hanhe autoclaved aerated concrete machinery

Introduction:

we are specialized supplier of complete set of autoclaved aerated concrete plant with50000, 100000, 150000, 200000, 250000, 300000, capacity annualy, including plant design, equipments installation, technical instruction, personal training, etc., and also we design and manufacture as per clients' requirement.

AAC is a siliceous material (sand, fly ash and silicon tailings such as waste porcelain clay, stone processing waste materials, blast furnace slag, etc.) and calcareous materials (lime, cement) as the main raw material, mixing fat gas agent (aluminum powder), by ingredients, mixing, casting, pre-raising, cutting, autoclave, curing process made of light porous silicate products, because by the hair contains a lot of gas even after the small pores, hence the name of aerated concrete.

Advantage:

1. Lightweight:

Porosity achieve 70% to 85%, volume density is generally 500 ~ 900kg/m3, as 1/5 of general concrete the 1/4of clay, the 1/3 of hollow brick, and similar with wood can float in water. It can reduce building weight, reduction in the cost of integrated building.

2. Fireproof:

Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 90mm walls can reach to 245 minutes fire resistance, 300mm thick up wall can reach to 520 minutes fire resistance.

3. Sound insulation:

Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 10mm thick wall up to 41 db.

4. Heatproof:

As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.

5. Permeability:

Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles.

6. Anti-seismic:

The same building structure, improve the two seismic than the brick level.

7. Green:

Manufacturing, transportation, all use the process of pollution, to protect arable land, saving energy, is one kind of a green building material.

8. Durability:

material strength is stability, in the specimens tested after one year of atmospheric exposure; the intensity increased by 25%, and remained stable after ten years.

9. Shortcut:

 it has good machinability, can be sawed, planed, drilled, nailed, and available appropriate as bonding of adhesive material, so create favorable conditions for building construction.

10. Economies:

 An integrated lower cost than using more than 5% of solid clay bricks, and can increase the usable area, greatly enhance the utilization of floor space.

Gongyi Hanhe autoclaved aerated concrete machinery

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.