2011 hot-selling Ceramic Sand Rotary kiln
Ceramic Sand Rotary kiln introduction:Ceramic Sand Rotary kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials. Cement kiln is used for making of cement clinker and there are dry and wet methods to make cement. metallurgy chemical kiln is used in metallurgy industry and ironworks for lean iron ore, chromium ore and ferronickel ore calcimine. Ceramic Sand Rotary kiln is used for calcimine of high aluminum vandal ochre in refractory material industry; for calcimine of calotte and aluminum hydroxide in aluminum manufacturer; for claiming of chrome sand ore and chrome powder ore in chemical plant.
Ceramic Sand Rotary kiln work principle:Ceramic Sand Rotary kiln mainly consists of axially symmetrical, Yang stripper plate, gearing, supporting device and seals and other parts. Dryer is one with horizontal direction slightly sloping cylinder, material into from high end to join, high temperature hot flue gas and material flow into the cylinder, along with the cylinder body rotation, material operation to lower end. On the wall of the cylinder copy board the material start to copy and asperse, make the material of surface in contact with air drying rate increases, in order to improve and promote materials on. After drying product from the bottom bottom collection.
Ceramic Sand Rotary kiln is used for baking active lime and dolomite in the steel factory and ferroalloy factory.
Ceramic Sand Rotary kiln Features:
1. Low pressure drop pre heaters.
2. Raw mill equipped with High efficiency separator.
3. Raw Meal blending in CFC silo.
4. Pre calciner suitable to work with alternative fuels.
5. Inlet & discharge fitted with efficient seals.
6. Benchmark cooler design.
7. Low Fuel Consumption..
Main technical parameters of Ceramic Sand Rotary kiln:
Specificttions(mm) | Kiln demensions | Output(t/h) | Rotation speed(r/min) | Moto power(kw) | Weight | Note | ||
Diameter(mm) | Length(mm) | Obliq-uity(%) | (t) | |||||
Ø1.4*33 | 1.4 | 33 | 3 | 0.9-1.3 | 0.39-3.96 | 18.5 | 47.5 | ---- |
Ø1.6*36 | 1.6 | 36 | 4 | 1.2-1.9 | 0.26-2.63 | 22 | 52 | ---- |
Ø1.8*45 | 1.8 | 45 | 4 | 1.9-2.4 | 0.16-1.62 | 30 | 78.2 | ---- |
Ø1.9*39 | 1.9 | 39 | 4 | 1.65-3 | 0.29-2.93 | 30 | 77.59 | ---- |
Ø2.0*40 | 2 | 40 | 3 | 2.5-4 | 0.23-2.26 | 37 | 119.1 | ---- |
Ø2.2*45 | 2.2 | 45 | 3.5 | 3.4-5.4 | 0.21-2.44 | 45 | 128.3 | ---- |
Ø2.5*40 | 2.5 | 40 | 3.5 | 9.0-10.5 | 0.44-2.44 | 55 | 149.61 | ---- |
Ø2.5*50 | 2.5 | 50 | 3 | 6.25-7.4 | 0.62-1.86 | 55 | 187.37 | ---- |
Ø2.5*54 | 2.5 | 54 | 3.5 | 6.9-8.5 | 0.48-1.45 | 55 | 196.29 | ---- |
Ø2.7*42 | 2.7 | 42 | 3.5 | 10.0-11.0 | 0.10-1.52 | 55 | 198.5 | ---- |
Ø2.8*44 | 2.8 | 44 | 3.5 | 12.5-13.5 | 0.437-2.18 | 55 | 201.58 | Suspension preheating kiln |
Ø3.0*45 | 3 | 45 | 3.5 | 12.8-14.5 | 0.5-2.47 | 75 | 210.94 | ---- |
Ø3.0*48 | 3 | 48 | 3.5 | 25.6-29.3 | 0.6-3.48 | 100 | 237 | Outside disassemble kiln |
Ø3.0*60 | 3 | 60 | 3.5 | 12.3-14.1 | 0.3-2 | 100 | 310 | ---- |
Ø3.2*50 | 3.2 | 50 | 4 | 40.5-42 | 0.6-3 | 125 | 278 | Outside disassemble kiln |
2011 hot-selling Ceramic Sand Rotary kiln