Ads by Google
CS BATTERY CHARGER SERIES
Three stages variable charging voltage algorithm by timing for maximizing the battery lifetimeLarge charging capacity design (40A for 12Vdc mode, 20A for 24Vdc mode) for shortening the charging timeSelectable charging currents based on connected battery capacity for extending battery lifetime with optimized charging currentMultiple voltage charging design for protecting diverse types of batteries of Flooded Lead-Acid, Gel, AGM chemistries batteriesWider input voltage range from 90Vac to 280Vac for universal inputHigh AC to DC converting efficiency design (higher than 80%)Smart fan control -Build-in fan control firmware for controlling fan on/off status bases on charger operating mode. When the battery is charged, the fan will stop to reduce the noise and also extend the fan lifetime.
Specification
Product Function
Ability to charge Flooded Lead-Acid, Gel, AGM chemistries.
Super charger 40 will accept a wider range of 90-280Vac input power and convert it to approximately 12/24 Vdc to power charge batteries.
In normal operation, the Super charger 40 accept AC input voltage and converter it to DC output which has three stage timer-based charging algorithm.
MODEL | CS-4012 | CS-2024 |
CAPACITY | 40A/12V | 20A/24V |
Input Voltage | 180-280VAC full performance | |
90-180VAC automatically derates to 50% of full load current. | ||
Input Frequency | 40Hz to 70Hz | |
Nominal Output voltage | 12Vdc manual adjustable | 24Vdc manual adjustable |
Output current | Input voltage 180-280V, output current 40A; Input voltage 90-180V, output current 20A | Input voltage 180-280V, output current 20A; Input voltage 90-180V, output current 10A |
Rated output current | manual adjustable | |
Current accuracy | ± 6% of full rated output current @25°C, for target currents across the range from 10% rated output (for absorption exit criteria accuracy) to the current limit setpoint. | |
Load regulation | 1.5% | |
Current limit | 40-44Amp | |
Dead-battery charging | Minimum 10Vdc | |
Efficiency | 80% at 230VAC full load, 25°C. Output voltage 14.4V | |
80% at 230VAC full load, 25°C. Output voltage 28.8V | ||
Battery type selected | Flooded Lead-Acid, Gel, AGM, manual adjustable | |
Parallelable outputs | Allow two chargers to be connected together in parallel | |
Operation temperature | -10 to +40°C | |
Relative humidity | 5~95% without condensation | |
Noise | Unit requirements: below 50dB | |
Storage conditions Temperature | -20°C to +80°C | |
Cooling | Smart fan control | |
EMC | EMS: EN55024 EMI: EN55022, Class A | |
Safety | CE | |
Dimensions | 260*225*83mm | |
CE Lead Acid Battery Charger