battery charger 1.Input: 110v or 220v AC 50/60Hz 2.Output: 1.2v DC 240mA, 9V DC 35mA 3.For AA/AAA/9V battery

AA/AAA/9V Ni-MH or Ni-CD battery charger

Specification:

Input: 110V or 220V AC 50/60Hz

Output: 1.2V DC 240mA

             9V DC 35mA

             AA 120mA*1  AA 120mA*2

             AAA 120mA*1  AAA 120mA*2

Feature:

1.This charger can charge 1-2pcs AA/AAA and 1 piece of 9V battery, also can charge single battery.

2.It can only charge the rechargeable battery, the dry one would not be charged by it.

3.The constant and current voltage keep the battery longer using life.

4.There are two LEDs near the polarity showing the charging process of AA and AAA.   The Led near the positive shows the charging situation of the left charging slot; the negative one shows the left one.

5.The charger charge the 9V battery without any show on LED, there is no trickle charging current to continue charging after it fully charged. LED will not turn off when fully charged.

6.The LED would be in red after the battery loaded and connected with the power source, the corresponding LED would go out after the battery fully charged.

7.Constant charging current keeps the battery longer using life.

8.Select the correct charging slot and make sure all matches the polarity"+/-" on the battery, otherwise, it will not work.

AA/AAA/9V Ni-MH or Ni-CD battery charger