Welcome to ECVERY
3A Molecular Sieve for Biogas Drying
3A Molecular Sieve for Biogas Drying
Supplier Info
[China Supplier]
Contact Person : Ms. Wu Joan
Tel : 86-799-6611966 6611995 6611555
Fax : 86-799-6611965
Product Detail
7 years manufacturer of Zeolite 3A molecular sieve. Application: Ethanol , methonal drying. Sphere & Pellet ISO9001:2000

XINTAO Molecular Sieve 3A

Introduction:

Molecular Sieve 3A is an alkali metal alumino-silicate; it is the potassium form of the type A crystal structure. Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers; and this maximises lifetime when dehydrating such molecules.

Typical Chemical Formula0.45 K2O . 0.55 Na2O . Al2O3 . 2 SiO2 . 4.5H2OSiO2 : Al2O3 ≈2

  

Technical Parameter

Item

Unit

Technical data

Shape

Pellet

Sphere

Diameter

mm

1.5-1.7

3.0-3.3

1.7-2.5

3.0-5.0

Size ratio up to grade

%

≥98

≥98

≥96

≥96

Bulk density

g/ml

≥0.68

≥0.68

≥0.68

≥0.68

Wear ratio

%

≤0.20

≤0.25

≤0.10

≤0.10

Crushing strength

N

≥45/cm

≥60/cm

≥30/piece

≥70/piece

Static water adsorption

%

≥20

≥20

≥20

≥20

Ethylene adsorption

%

≤3.0

≤3.0

≤3.0

≤3.0

Water content, as shipped

%

≤1.5

≤1.5

≤1.5

≤1.5

  

Typical Application1) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadien) 2) Cracked Gas Drying3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. 4) Drying of highly polar compounds, such as methanol and ethanol5) Drying of liquid alcohol6) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled.7) Drying of refrigerants

  

RegenerationXINTAO molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Size 3A - Zeolites are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1.6, 3.2.

AttentionTo avoid damp and pre-adsorption of organic before running, or must to be reactivated.

3A Molecular Sieve for Biogas Drying

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.