Cationic Polyacrylamide Wastewater treatment chemicals Flocculant coagulation MSDS ISO14000 Cationic Polyacrylamide C5015water treatment chemicals flocculant coagulation

Principal Uses

C5015 is a medium charge cationic polyacrylamide. It can be used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in dewatering, clarification, flotation in papermaking, textile printing and dyeing, paper making, wooden floor industry and municipal wastewater treatment.

Specifications 

Type	C5015
Appearance	white granule
Cationicity,%	medium
Mw(million)	high
Solid content	90% min.
%pH(0.25%soln)	6 - 8
UL Viscosity(cPs)	5.5 - 6.5
Dissolving time	1 hours max.(10°C)
Insoluble	0.5% max.
Monomer free	0.05% max.

Materials of Construction

Aluminum, zinc, copper, or iron should not be used in any part of the feed system. Cross-linked polyethylene, fiberglass, stainless steel are recommended materials for dissolution tanks. Stainless steel or PVC are the preferred for pump heads and feed lines.

Handling and Storage

Suggested in-plant storage of  C3215 is one year in unopened bags. Store in a cool, dry area. For spills of dry C3215, sweep up the material and reuse, if possible. Do not spray water on spilled dry product because the resulting gel is very slippery and difficult to clean up. For spills  C3215 of solutions, sprinkle sawdust or vermiculite over the spill area and sweep into approved chemical disposal containers. Rock salt cuts slipperiness.

 ,

Cationic polyacrylamde powder C5015 for waste water treatment