Adsorbed material for adsorbed natural gas (ANG) and pressure swing adsorption (PSA) activated carbon

activated carbon

1 Powder product

Item	Content
Bulk density g/cm3	0.4~0.55
Water ≤ m%	5%
Grain size ≤	300 mesh
Width and ratio of micro pore	1~2nm,≥90%
Specific surface ≥ m2/g	2000
Volume of micro pore ≥ cm3/g	1.2
Volume uptake V/VCH4 at 25,3.5MPa	110~130

Item	Content
Bulk density g/cm3	0.2~0.35
Water ≤ m%	5%
Shape	≥Φ2mm cylindrical or other shape
Width and ratio of micro pore	12nm,≥90
Specific surface ≥ m2/g	2000
Volume of micro pore ≥ cm3/g	1.2
Volume uptake V/VCH4 at 25,3.5MPa	110~130

Use:

ANG: The product is mainly used in adsorbed natural gas, and it can be used in adsorbed natural gas vehicle.

PSA: This product can be used in PSA for separating mixed gas, such as the separation of air and the recycle of H2 and CO2.

Use way:

The product must be dehydrated 6 hours at 110 in vacuum drier or it must be atmospheric dehydrated 24 hours before use, then it can be used for ANG and PSA, after it is packed in storage tank.

Packing specification: 12.5Kg/bag, 20Kg/barrel

High surface activated absorbed material activated carbon