Ads by Google
Product Name: Synthetic Cryolite/sodium aluminum fluoride /Cryolite bath
Product Description: White free flowing power
Formula: Na3AlF6
Standard: GB/T4291-2007
CAS No.: 13775-53-6
Hs No.: 28263000
Specification:
Grade | Chemical Composition/% | Physical Character | |||||||||
F | Al | Na | SiO2 | Fe2O3 | SO42- | CaO | P2O5 | H2O | L.O.I | ||
≥ | ≤ | ||||||||||
CH-0 | 52 | 12 | 33 | 0.25 | 0.05 | 0.6 | 0.15 | 0.20 | 0.20 | 2.0 | |
CH-1 | 52 | 12 | 33 | 0.36 | 0.08 | 1.0 | 0.20 | 0.03 | 0.40 | 2.5 | |
CM-0 | 53 | 13 | 32 | 0.25 | 0.05 | 0.6 | 0.20 | 0.02 | 0.20 | 2.0 | |
CH-1 | 53 | 13 | 32 | 0.36 | 0.08 | 1.0 | 0.60 | 0.03 | 0.40 | 2.5 | |
Properties:
The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.95—3.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18—100centigrade. It’s slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Uses:
It’s mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing:
In plastic coating woven bags with plastic film, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.
Professional supplier of synthetic cryolite Na3AlF6