polyaluminium chloride PAC If the water quality is complicated, we can produce it depend on your requirements.

 Polyaluminum chloride PAC

Poly aluminum chloride is a water-soluble substances, it has good thermal stability and high solubility. In the drying process will be 40%-50% solid content of poly-aluminum chloride solution, the introduction of high-pressure pump, through pressure entered the dryer in the nebulizer for atomization, scattered into a tiny droplet, the droplet was obtained after drying granular products that enable the completion of drying and granulating at the same tine.

If the water quality is complicated, we can produce it depend on your requirements.

Usage: Throws and adds while mixing product (solid) this with normal atmospheric temperature water according to 1:3 ratios by weight, to after totally dissolving, in addition water dilutes the necessary density. Original water at the turbid 100-500mg/I, throw person who add for 3-6 mg/I. Concrete to throw when adding, should carry on lab scale by situation according to water quality, elect best to shoot the adding amount, and then put into operation.

Packing: The solid is in bags for 25Kg, one layer of plastic sheeting inside; the outer plastics are worked out bag.

Storage: Products should deposit indoors dry, ventilating, shady and cool place, and keep dry.

Note: If need the production for orientation according to user's enquiry that products can of liquid.

polyaluminium chloride PAC