cathode electrophoresis painting line is widely used in the industry. it is energy saving product.

 cathode electrophoretic production line

Specification:

epoxy resin powder: 13 ± 3%

dipping time: 3.0min

Electrophoresis liquid PH value: 6.1 ± 0.2

Electrophoresis liquid temperature: 30 ± 2 °C (in accordance with requirements of electrophoresis liquid manufacturers

Electrophoresis liquid conductivity: 1400 ± 350us/cm

Anode liquid conductivity: 400-800 Us / cm

Voltage: 0-250V

Current density: 12-15A / m

Film thickness: 10-25Um (based on product requirements)

Electrophoresis tank comprising main tank and auxiliary tank, the gap of the main tank and auxiliary tank: 50 ~ 100mm. overflow auxiliary tank set at the exit of electrophoresis tank, the volume of the main tank is about 1 / 10, over flow with a filter mesh between the main tank and auxiliary tank , filter mesh 60 items .

Construction:

(1) at the bottom for the taper-shaped structure, with the bottom and corner for the arc-shaped to minimize the angle;

(2) epoxy paint coated for insulation(internal )

(3) keep the gap meeting the scope of specification between the main tank and auxiliary tank.

 (4) insulated material for the adjustable valve.

(5) liquid paint cycles of about: 3 times / h, liquid paint in the electrophoresis flowing velocity ≥ 0.2m / s, the direction of the auxiliary tank from the bottom 50mm , flowing velocity ≥ 0.4m / s;

cathode electrophoretic painiting line