CKH-1008 Dual cartridge industrial half face dust mask
Structural features:
Consist of four parts: mask body, dust filters, exhalation valve and head harness straps;
To improve the compactness and reduce facial compression, the mask body replaced by a curved facade and enlarge properly;
Dust filters can be replaced;
.
Specifications:
Dust collection efficiency(%) ≥95
Inhalation resistance≤49.0
Exhalation resistance(Pa)≤29.4
Rise of inhalation resistance(Pa) ≤117.6
Weight(g) ≤100
Dead space(cm3) ≤160
Application :
1.Please use as follows: Dust operating environment, Oxygen concentration should above 18% volume, do not apply to use in toxic gases operating environment;
2. Keep the mask tightness before enter the non-toxic dust-exposed sites;
3. The process of using, when short of breath or find particulate in the mask, please replace the dust filters in powder free place.
Maintance:
Remove the dust filters before washing, do keep it out of water, gently scrub the mask body in warm water with less than 30 °C, excessive force, or the water temperature is too high will cause distortion phenomenon, baking and exposure are forbidden.
CKH-1008 Dual cartridge industrial half face dust mask