SMC WATER TANK 'S ADVATAGE:
1-Easy to assemble
2-Made of bottom, side and roof panels and panels with manhole
3-Tank of different height uses different bottom panels, side panels and top panels strictly according to the assembling principle
4-Assembling principle guarantees safety coefficient by reasonable saving of materials
5-Supports system (tie system) is designed and verified by precise mechanical calculations and tests
6-Stainless steel are used in tie system
7-Stainless steel or PVC supports are used
SMC SPECIFICATIONS
| Physical properties | UNIT | SMC-1 | SMC-2 | SMC-3 | |
1 | Specific gravity | g/cm3 | 1.75—1.95 | |||
2 | Water absorption | mg | ≤20 | ≤20 | -------- | |
3 | Shrink rate | % | ≤0.15 | ≤0.15 | ≤0.30 | |
4 | Heat deflection temperature | °C | ≥240 | ≥240 | ≥220 | |
5 | Izod impact strength unnotched | KJ /m2 | ≥90 | ≥60 | ≥45 | |
6 | Flexural strength | MPa | ≥170 | ≥150 | ≥135 | |
7 | Insulation resistance | Normal | Ω | ≥1.0×1013 | ≥1.0×1013 | ≥1.0×1012 |
24hours after soaking | ≥1.0×1012 | ≥1.0×1012 | -------- | |||
8 | Dielectric strength (at 90°C in oil) | MV/m | ≥12 | ≥12 | ≥10 | |
9 | Dielectric loss factor (at 1 MHz ) | ≤0.015 | ≤0.015 | --------- | ||
10 | Dielectric constant ((at 1 MHz ) | ≤4.5 | ≤4.5 | --------- | ||
11 | Surface resistivity | S | ≥180 | ≥180 | ≥150 | |
12 | Tracking resistivity (PTI) | V | ≥600 | |||
13 | Flammability | FV0 | FV0 | --------- | ||
14 | Long term heat resistance temperature | 155 | 155 | 130 |
These aboved specifications are made by our country's standard which we involved in. Detailed specifications could be adjusted to meet your products' demands.
SMC water tank