Product Features 1,Plug in/out and Integrated style sutge protecive device; 2,The coler of visible window shows operating sta

IntroductionCLY2-seres surge protective devie (in short :SPD, alias:surge protector , surge arrester ) is suitable for TN-S,TN-C-S,TT,TI etc power supply system of AC 50/60Hz≤380V, and used at th equipotential connection ,which protects the electric network not shocked by the thunder and lightning ,its designed according to GB18802.1,IEC61643-1,it adopts 35mm standard rail ,there is a failure release mounted on the module of surge protective device . When the SPD fails in breakdown for over-heat and over-current , the failure release will help electric device separate from the power system and give the indication signal , green meas normal , red means abnormal, Kevin wiring mode , remote signalling output interface. It s alao could be replaced for the module when has operating voltage .

Product Features 1,Plug in/out and Integrated style sutge protecive device;2,The coler of visible window shows operating status;3,Dluble protection of over-heat and over-current;4,Have the accessory of remote signaling interface,could be remote control. Single-pole design ,can combined into single-pole or three-pole SPD Separator is built inside . When SPD fails in breakdown caused by overheat, separator can break it away from electric network automatically , at the same time giving the indication signal . Visual window shows white for normal working and it shows red after failure and separation .Kevin connection mode can be chosen . Big through flow capacity , quick response time and low residual voltage.Installation B grade lightning current SPD is used for equipotential connection when lightning ,Install to the juncture of LPZOA or LPZOB with LPZ1.Adopting 35mm standard guide installation , connecting copper lead is 10~35mm2 Generally installed to one aerial inlet of inlet of inlet low voltage main distribution cabinet . Conbine single-phase or three-phase surge protector freely according to users requirements . Generally installed to inlet low voltage main distribution cabinet earth wire should adopt bicolor conductor above 16mm2 .

CLY2 Series surge protector