Welcome to ECVERY
Mitre Clamp
Mitre Clamp
Supplier Info
[China Supplier]
Contact Person : Mr. Zhao Kevin
Tel : 86-546-8312771
Fax : 86-546-8312775
Product Detail
stone mitre clamp is mainly used for stitching of two sheets to 90 degree

               Item No.

                    Size

                        Weight

RZFT45

32*20cm

5Kg

stone mitre clamp  is mainly use for the man-made and natural stone sheets, or other similar sheet of 45 stitching to combining with 90 degree.

Since its launch, with high quality and innovative ideas, best-selling home and abroad, welcome customers to purchase.

When two workpieces are processed into a 45 edge bevel, then clean the 45 face of workpiece, evenly coated with adhesive, then put two workpiece of 45 bevel face assembling together, and the two 45°workpiece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.

First, put the bottom of width stone on the fixture work surface which with white rubber, the side of the narrow stone close to the 90 inside of the fixture.

Then two binder lever can be adjusted by adjusting spring device access to the top position of the workpiece,then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the workpiece fully bonded joints, solid, and then release the fixture.

Mitre Clamp

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.