Aristo Engine Degreaser powerfully removes grime, cleans engine and looks new, it is used on most metal surfaces including automobiles, boats, power mowers, machinery, garden, farm and construction equipments.
Application:
1. Engine must be off and cool.
2. Remove air cleaner cover and filter. Cover air intake system (or carburetor), distributor, all exposed wiring and electronic components. Limit rinse water contact on all underhood wiring and electronic sensors to prevent performance problems.
3. Spray Engine Degreaser on dry engine.
4. Allow to penetrate and clean for 10 to 15 minutes. Brush heavy deposit areas it required.
5. Before rinsing, place a rinse collection receptacle underneath the engine.
6. Rinse from the top down using a fine stream of water. Use a minimum amount of water. Do not dispose of rinse water on the ground in sewers floor drains or other waterways.
7. Remove all covers from carburetors, distributors, air intake system and electronic components. Replace all remove parts, immediately start engine and let idle for 10-15 minutes to dry.
Important:
Wipes product immediately from exterior painted surface to avoid streaking and dewaxing. Avoid use of Engine Degreaser on asphalt black top or other surfaces affected by organic solvents.
Engine Degreaser