Welcome to ECVERY
Pressure Sandblasting pot
Pressure Sandblasting pot
Supplier Info
[China Supplier]
Contact Person : Ms. peng jieqiong
Tel : 86-571-82393005 82735528
Fax : 86-571-82755375
Product Detail
Pressure Sandblasting pot 1) Air Requirement :6-25 C FM @ 60-125PSI 2) Tank Dia :12-1/2"dia, 27"length

Pressure Sandblasting pot

 

Specification:

1) Has safety pressure release valve,3/8in. Brass valves for air throttling and sand metering. 2) Work pressure: 65 to 125PSI 3) baked enamel finish. 4) Heavy duty 3/8in, 8-ft,hose has carbon steel shut off valve and 4 inter changeable nozzles. 5) Hood and instruction are in stock;6) Hose length: 10ft7) Tank dimension: 12-1/2"dia, 27"length8) Pressure gauge indicator: 0~125PSI9) Required compressed air system (not included): 2HP compressor with 3/8" diameter air hose10) Recommended media type: glass bead, silicon carbide, alumina, walnut shell, brass bead11) Recommended use: use with 80, 100,120 grit media, at 60PSI, with 3/32". Nozzle for best results (run time; 45minutes with 90lbs, media12) Water trap type: push button to drain13)Accessories: 3/32" nozzle,

Item Number

Pcs/ctn

G.W./N.W.

Dimension

Q’TY/40’

TB-RA20

1

23/21kgs

84×37×45cm

420PCS

 

Pressure Sandblasting pot

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.